12' Extra Heavy-Duty Inflatable Boat FB365

New Model V3.0 - German Heytex PVC, Heat Welded Seams, Fiberglass Covered Transom, Premium Quality.

Newest Saturn Inflatable Fishing Boats FB365 was based on popular FB300 boat, but made longer, for more space inside. This FB series boats were designed to take a serious beating! Almost overkill. Made from the same heavy-duty, commercial grade 1100 Denier PVC as all our other Saturn boats, but on top of that we added extra wide and extra thick rub protectors on the bottom of tubes, over keel, and on top of boat tubes!

In addition, there is a 2nd layer of extra thick 1.5mm PVC glued along the bottom of the tubes, all the way up to rub strakes on side of tubes. And, whole vessel bottom is also made of extra heavy-duty 1.5mm PVC fabric. That is the most extra protection available for any inflatables on a market today!

It is well known, that space inside inflatable boats, between two tubes, is at premium. To address this issue, we invented new, patent pending cargo lacing system on top of tubes, so that to move cargo from inside boat cockpit into over tubes areas. That way, cargo taking valuable space inside boat, can be instead secured on top of tubes, freeing more of seating area.

Saturn FB365 inflatable motor boat features two grommeted PVC strips that are shifted off center of tubes, leaving enough space to store cargo on top of tubes. Any type of gear can be lashed down using bungee cords, ropes, tied downs or strap to grommets. Cargo area spaces protected by extra wide rub strake for additional durability, so that to avoid damages to top of tubes. You can also seat on top of tubes, or even secure wooden board and mount chair on it!

Saturn FB365 is an extra heavy-duty inflatable boat, primarily designed for fishing. Optional motor mount can be added in the bow of the boat for electric trolling motor install. Two sockets for detachable fishing rod holders were added on top of tubes in the bow area. High quality adjustable fishing rod holders are also included as bonus!

Due to popular demands, to make boat lighter and faster to deploy, now we sell FB365 boats only with high pressure air deck floor. It is not just regular air floor, but extra heavy-duty, covered with additional layer of protection on top of floor. 

* Specifications are subject to change without notice

Specifications:

• German Heytex 0.9mm heavy-duty 1100 Denier PVC.
• Double line of grommet lines to secure cargo on top of tubes.
• Splash guards with safety grab rope.
• Extra thick and wide rub strake protector on top of tubes.
• Extra thick and wide rub strake protector on bottom of tubes.
• Extra thick and wide rub strake protector on bottom of keel.
• Additional 1.5mm PVC layer on bottom of tubes, up to side rub strakes.
• High-pressure air deck floor with extra protection layer on top.
• Bottom V-keel section of the boat made of 1.5mm PVC.
• Two mounting brackets for fishing rod holders.
• 4 x D-rings in a bow area and 2 x D-rings on top of tubes in rear.
• Towing D-ring on bottom of tubes in a bow area.
• Front stainless steel handle with integrated D-ring for anchor rope.
• Additional holders for rowing oars inside tubes.
• Included: hand pump, repair kit, carry bag, 2 aluminum benches, anchor rope and rowing oars.
• Boat tubes shipping size 45x25x15", Weight 125lbs. Floor shipping size 34x16x6, Weight 32lbs.
• BONUS, FREE GIFT - Two high quality fishing rod holders.
• Bow motor mount is optional, NOT included. Available as separate part in Accessories section.
• Duffel bags and fishing rods shown for illustration purposes only. NOT included.
• 
  

Tech Specs (?)