Manufacturer of Saturn Inflatables Since 1999


Seating Frame For KaBoats, Kayaks and Boats.

(0 reviews) Write a review
You save: C$11000

Shipping: C$30

Adjustable Width, Seating Frame for KaBoats, Kayaks and Boats.

Both sides adjustable length. Can be cut shorter to fit into narrow KaBoats and kayaks.

Sitting frame will extend from 14" to 35", fitting most inflatable boats with interior widths between those measurements. Please measure inside your boat to make sure.

What makes this frame different from our regular seating platform for boats, is that both sides can slide in and out, not just one side. That allows easy modifying frame to fit into much more narrow KaBoats, and even kayaks. Just cut tubes shorter on all 4 sides, and you can install this frame into any KaBoat or kayak with as small as 14" inner width. You can't do that with regular platform that was designed for much wider boats. Also, 2 frames can be joined together, to make seating platforms for 2 fishing seats, side-by-side.


Due to the fact that this system is mounted to the floor and not to the boat tubes, vibration and bumps during a choppy ride are significantly reduced.



Holes in the aluminum frames are designed to match 7" economy boat seat pedestals that are sold in many retail stores such as Canadian Tire or Wal-mart. A swivel base and boat fishing chair with back support can easily be installed on top of the boat seat pedestal.


You will also need these:




An Economy boat seat pedestal retails for around $12, a swivel base costs $8, and fishing chair prices can vary depending on comfort level from $20 to $45. You also will need stainless steel mounting hardware. Bolts with round heads should be inserted in the frame from the bottom up, so that the round head of the bolt touches, but does not scratch the floor. 

The adjustable aluminum frame can fit any size boat from SD230 to SD470 and many other brands of boats on the market. It will work with air deck or hard deck boats.



The installation is simple. First, deflate the tubes and simply place the platform inside the boat. Then, push the adjustable components away from each other until the outer sides of the aluminum frame tubes touch the inside of the boat tubes. Finally, tighten the screws and inflate boat tubes to squeeze the seating platform between the boat tubes. For boats with plywood floors, the platform will rest on the stringers.


PLEASE NOTE: Boat chair pedestal, swivel platform, chair and hardware are not included, but can be purchased separately at many retail stores.  Four bolts provided as free bonus gift, so that to secured pedestal to platform.


Tech Specs

OD25.6x1.6 mm
OD32x1.8 mm
Specifications and accessories are subject to change without notice. Max O/B Motor means: maximum power of outboard motor that can be safely used to plane the boat loaded to the maximum capacity at normal water surface conditions. Please exercise common
Average Star Rating:
0.00 (0 reviews Total)
  • 5 star
  • 4 star
  • 3 star
  • 2 star
  • 1 star
Have you used the product?
Tell us something about it and help others make the right decision
Show reviews with:
5 star (0 reviews)
4 star (0 reviews)
3 star (0 reviews)
2 star (0 reviews)
1 star (0 reviews)

No reviews found

You may also be interested in